Product Solutions


High performance automatic feeding, jogging, drilling and delivery system ideal for multi-hole drilling for wire-o. This system combines maximum output with dramatically reduced set-up time. The only manual set-up is the positioning of the heads when changing the hole pattern. Paper size and spine margin of the holes are programmed and set automatically by the push of a button. The PB-15is the most efficient method for drilling of loose-leaf, perfect bound books,stitched or folded products. For example, drilling piles of loose-leaf reach an output of up to 1,500 piles per hour. This is an increase of up to ten times the speed of other methods.

Standard features include; stroke and spindle control, cooling and lubricating,flat table-infeed, air tables in jogger and drilling station, low friction rollers, ST function programmability for mechanical binding hole patterns, automatic change of paper size; and motorized drilling belt.

PB-15 Specifications

Drilling heads:   4 heads standard, up to 15 heads or multi-spindle heads optional
Drilling hole diameter   1/8" - 5/8" (3 - 14 mm)
Minimum hole separation:   3/64" (1 mm)
Minimum paper size:   4 3⁄4" x 3 1⁄4" (120 mm x 80 mm) (drilled on the long side)
Maximum paper size:   14 1⁄2" x 12" (360 x 300 mm) (drilled on the long side)
Maximum pile height:   Up 2" (50 mm), optionally up to 3" (75 mm)
Spine margin behind drill bits:   3/16" - 1" (5 - 25 mm)
Output:   Up to 1,500 piles/ hour
Space requirements
Including conveyor belt:
  102" wide (2,600 mm)
95" deep (2,400 mm)
51" high (1,300 mm)
Power requirements:   230 volts, 3 phases, 60 cycles,
25A, 7, 5kW
Air consumption:   250 litres / minute at 6 bar pressure
Options:   Internal impulse lubrication for paper drill bits

Drill bit breaking sensors for inline operation

Technical data is subject to change without notice.